HTW-130&HTW-200双绞机系列主要技术参数
Double Twister machine Main Technical Parameters
机械型号Machine types | HTW-130 | HTW-200 |
收线盘具Take -up Bobbin | Ф130mm | Ф200mm |
最大转速Max speed | 4000 r.p.m(8000TPM) | 3500 r.p.m(7000TPM) |
微细线径Fine wire dia. | Ф0.020-Ф0.05mm | Ф0.025-Ф0.12mm |
绞距Lay length | 0.5-10mm | 0.5-10mm |
主电机Main motor | 2.2kW | 3.7kW |
股数Number of strands | 7或其它定做 | 7或其它定做 |
外形尺寸 Dimensions(L×W×H) | 1280×480×1500 | 1700×750×1200 |
主要规格 Main specifications | 使用线盘：塑胶线盘 Wire spool:Plastic spool | 使用线盘：塑胶线盘 Wire spool:Plastic spool |
最大外径 Max diameter:Ф130mm | 最大外径 Max diameter:Ф200mm |
筒体直径 Diameter of cylinder:Ф90mm | 筒体直径 Diameter of cylinder:Ф90mm |
内宽 Inner width：90mm | 内宽 Inner width：110mm |
外宽 Outer width：130mm | 外宽 Outer width：200mm |
轴孔直径 Bore diameter：Ф20mm | 轴孔直径 Bore diameter：Ф25mm |
用途 Uses | 适合7股以上的铜包铝、铜包钢、裸铜线、漆包线、合金线镀锡线绞合 Suitable for twisting of more than seven strands of the copper clad aluminum,copper clad steel,bare copper wire,enameled wire and tinned alloy wire. |
主轴承部 Bearing for main spindle | 油脂润滑，自然循环冷却 Grease lubrication,natural circulation cooling |
绞向 Lay direction | 左与右 Left or Right |
绞距 Lay length | 任意设定 Set freely among |
指示Instructions | 机器的状态、故障状况在触摸上均有指示 The touch screen has all the instruction of machine status and fault state |
控制Control | 变频器+PLC程空器+触摸品上均有指示 Converter+PLC programmable device+touch screen all have instruction |
排线单元Traversing unit | 排线排距可调 Adjustable for wire pitch |
机器方向 Machine direction | 右手 right hand |
机器噪音Machine noise | ≤85db |
安全装置Safety device | 紧急切断按钮可切断操作回路 Emergency stop button can cut off the operating circuit |
本机体罩壳的强度会使部品损坏、飞散，实施强度计算来避免损坏 The strength of safety cover can avoid the damage of flying components |
在回转处安装安全罩壳、以防手、脚、手指伸入挟、卷等的危险地方 Safety cover installed in the running parts ensures the operating safety of workers |
电话直呼
在线留言
发送邮件